How to Turn On and Use Your Windshield Wipers
April 20, 2022 · Updated November 20, 2026 · 3 min read
In most cars, the windshield wipers are controlled by the stalk on the right side of the steering column. Push it up or down to choose a speed, and pull it toward you to spray washer fluid. Some cars put the controls on the left stalk or a dial at the end of the stalk. Here's how the settings work, including rear and rain-sensing wipers, and how to keep the blades working well.
How to turn on the windshield wipers
Start the car (or switch the ignition to "on"), then move the wiper stalk. The positions are usually marked on the stalk itself:
- MIST (or 1x): push the stalk up briefly or pull it down for a single wipe. Handy for spray from other cars.
- OFF: the wipers are parked.
- INT (intermittent) or AUTO: the wipers sweep every few seconds. A small ring on the stalk sets the delay, or the sensitivity on rain-sensing cars.
- LO: continuous wiping at normal speed for steady rain.
- HI: continuous fast wiping for heavy rain.
Not sure which way your stalk moves? The symbols are printed on it, and your owner's manual shows the layout for your model.
How to spray washer fluid
Pull the wiper stalk toward you, or press the button at its end on some cars. Washer fluid sprays and the wipers make a few sweeps. Hold it for a second or two. Keep the reservoir topped up with proper washer fluid, which won't freeze in winter and cleans better than water.
Rear wipers
On SUVs, hatchbacks and wagons, the rear wiper is usually controlled by a ring or a switch at the end of the same stalk. Push the stalk forward (away from you) to spray the rear window. Many rear wipers also run automatically when you shift into reverse with the front wipers on.
Rain-sensing (automatic) wipers
Many newer cars have a sensor behind the windshield, near the mirror, that detects rain and sets the wiper speed for you. Turn the stalk to AUTO and use the ring to adjust sensitivity. A few tips:
- Turn AUTO off before a car wash. The sensor will start the wipers, which can damage them.
- Keep the sensor area clean. Dirt, stickers or a toll tag in front of it confuse it.
- Use the right glass. If your windshield is replaced, the new one needs the right sensor mount, and the sensor must be reattached properly. Otherwise auto wipers act erratically.
Tips for using your wipers
- Never run the wipers on a dry windshield. It scratches the glass and wears the rubber. Spray washer fluid first.
- In winter, free frozen wipers before switching them on. Running them while they're stuck can burn out the motor or tear the rubber. Use the defroster, not hot water, which can crack cold glass.
- Turn the wipers off before shutting the engine off in freezing weather, so they don't try to start against ice next time.
- Turn on your headlights when you use your wipers. Many states require it.
Keep the blades in good shape
Wiper blades usually last six to twelve months. Streaks, chattering, skipped patches or a squeak mean it's time for new ones. Wipe the rubber edge with a damp cloth every few weeks to remove grit. See our guides on how long wipers last and how to change wiper blades.
Worn wipers dragging grit across the glass can leave scratches and make chips worse. If your windshield has damage, get free quotes from local auto glass shops.
Need a windshield repaired or replaced?
Compare local auto glass shops and get free quotes - no fees, no obligation.
Get Free Quotes Repair or replace?